In most hinged situations this is not much of an issue, however, when the door gets to oversized proportions, any bowing or twist problem is magnified. This is made even more of a problem if the door is fitted into a pivot, sliding or cavity sliding situation.

Designed to work specifically with CS FOR DOORS TrackSystemS and CaviLocK hardware, the AluTeC is clad in a 2mm thick aluminium skin, which can be powder coated in a variety of colours. Polystyrene batts are fitted for increased sound and thermal performance. Inert construction materials mean no bowing problems caused by temperature differentials. Aluminium construction also means that the door will not rust or rot over time.
The AluTeC is the modern solution to all these problems with its internal aluminium frame construction and pre-finished aluminium skin. Their inherent strength means they can be made up to a massive 4x2m for use in large cavity or surface sliding situations. The AluTeC is also suitable for hinged and pivot applications.

As a variation on hinged, the AluTeC is also available as a pivoting door. CS FOR DOORS can supply the pivot mechanism, with mounts fitted to the door for this application. If you want something really different, specify full automation for a stunning entrance solution.
For a hinged doorway solution, match the AluTeC door with CS FOR DOORS aluminium Pre-Hung Jambs, AluJambS. Hardware and hinges are easily factory fitted and doors can be colour matched to other joinery in factory or office fit-outs.