You are using an outdated browser version not supported by this website.
Click here to upgrade your browser
5,288 products with technical literature, drawings and more from leading suppliers of NZ architectural materials.
Case studies, new products and product news from leading suppliers of NZ architectural materials.
Blogs for architectural specifiers, offering product, design and business advice.
Constructed from Lead-free 304 Stainless Steel, the Storm Tapware Collection gives a timeless ultra sleek design with minimal lines making it at home in all modern bathroom designs. The range of four on-trend colours allows flexibility to suit all styles, while a full range of bathroom and kitchenware makes it possible to easily fit out an entire home in the same great look.
Available in four finishes — choose from two PVD finishes Brushed Copper and Brushed Gunmetal, as well as Brushed Stainless, and classic Chrome finish.
PVD coatings are highly resistant to tarnishing and corrosion, making them ideal for plumbingware. PVD is used for a wide range of decorative finishes with colours that do not fade, and making them less susceptible to superficial damage and wear.
This new PVD coating technology allows us to extend a 5 year warranty on finish on all PVD coated products, alongside a comprehensive 10 year product warranty.
The Storm range incorporates some innovative features. The Storm Gooseneck Sink mixer has an ultra minimal design, and has been engineered with the new Cold Start Technology (CST). With CST the cold water setting is at the top, which is normally the mixed hot/cold position for regular mixers, so one only turns on cold water when the lever is in the upright start position. This results in reduced hot water consumption, and also allows the mixer to be installed closer to the wall if required as the lever doesn’t get pushed back towards the wall during operation.
The Wall Mounted basin mixer incorporates a slim pin style lever used across the Storm range coupled with minimal faceplates on the spout and mixer. It features a unique 'three piece in-wall component design', allowing it to be installed in a variety of ways to suit the bathroom design. It can be installed in the wall with the mixer installed on either side of the spout, and with the handle pointing up or down depending on the design requirements.
The range carries a full 10 year labour and replacement Warranty and 5 year labour and replacement Warranty on the coloured PVD finishes. And as with all Voda products this is combined with a NZ-based after-sales support team for total peace of mind.
Voda Plumbingware is a Watermark Certified Tapmaker, and manufactures to the New Zealand and Australian standards AS/NZS 3718, AS/NZS 4020, AS/NZS 6400 (WELS). Voda's Quality Assurance system is independently audited on an annual basis by SAI Global.
Voda Plumbingware are 100% NZ Owned and operated. We are committed to producing the highest quality tapware specifically for NZ conditions, backed by world leading after sales support and service.
Product EnquiriesNew and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.