Low Pressure Copper Electric Hot Water Cylinders by Rheem

Low Pressure Copper Electric Hot Water Cylinders

Description

This traditional copper lined cylinder comes in a wide range of sizes. Models range from the small 15 litre underbench to the larger 350 litre capacity. Choice of 3 inlets (90–180L only). A range of tall, medium and short size options to make retrofit replacement straightforward.

Key Features

Low pressure use, rated for a maximum of 76kPa water pressure, with the Heavy Head models to 120kPa
Lightweight and easy to install
Galvanised steel exterior
Solstice Green insulation helps maintain the optimum water temperature, reducing energy use and providing economic and environmental benefits
Designed and manufactured in New Zealand
5 year domestic cylinder warranty

Available in the following model configurations:

LPCOPPER 14904013 | 40L | 490 x 460mm | 2.0kW
LPCOPPER 14T09013 | 90L | 785 x 510mm | 2.0kW
LPCOPPER 14T11013 | 110L | 950 x 510mm | 2.0kW
LPCOPPER 12T13513 | 135L | 800 x 610mm | 2.0kW
LPCOPPER 14T13513 | 135L | 955 x 560mm | 2.0kW
LPCOPPER 16T13513 | 135L | 1140 x 510mm | 2.0kW
LPCOPPER 18T13513 | 135L | 1465 x 460mm | 2.0kW
LPCOPPER 54T13513 | 135L | 1030 x 540mm | 2.0kW
LPCOPPER 12T18013 | 180L | 1020 x 610mm | 2.0kW
LPCOPPER 12T18015 | 180L | 1020 x 610mm | 3.0kW
LPCOPPER 14T18013 | 180L | 1220 x 560mm | 2.0kW
LPCOPPER 14T18015 | 180L | 1220 x 560mm | 3.0kW
LPCOPPER 54T18013 | 180L | 1355 x 540mm | 2.0kW
LPCOPPER 54T18015 | 180L | 1355 x 540mm | 3.0kW
LPCOPPER 16T18013 | 180L | 1510 x 510mm | 2.0kW
LPCOPPER 16T18015 | 180L | 1510 x 510mm | 3.0kW
LPCOPPER 14922515 | 225L | 1250 x 610mm | 3.0kW
LPCOPPER 16922515 | 225L | 1510 x 560mm | 3.0kW
LPCOPPER 14927015 | 270L | 1470 x 610mm | 3.0kW
LPCOPPER 14927025 | 270L | 1470 x 610mm | 2 x 3.0kW (simultaneous)
LPCOPPER 16927015 | 270L | 1800 x 560mm | 3.0kW
LPCOPPER 16927025 | 270L | 1800 x 560mm | 2 x 3.0kW (simultaneous)
LPCOPPER 14935025 | 350L | 1595 x 655mm | 2 x 3.0kW (simultaneous)
Under Bench - LPCOPPER 19901513 | 15L | 370 x 365mm | 2.0kW
Under Bench - LPCOPPER 19902513 | 25L | 525 x 365mm | 2.0kW
Under Bench - LPCOPPER 19904013 | 40L | 490 x 460mm | 2.0kW

Ranges

Hot Water Heating for the Home Domestic Electric Water Heaters

NZ Made

Scope of Use

Most commonly used in domestic dwellings
Good choice for like-for-like replacement
Rated for a maximum of 76kPa water pressure, with the heavy head models to 120kPa
Three inlets from which to choose from: bottom, left and right-hand sides
Indoor installation
Range of models available to suit between 1–5 people in moderate climates

Limitations on Use

Not suitable for outdoor installation

Due to localised water conditions, Rheem New Zealand advise that our Low Pressure Copper hot water cylinders are not suitable for installation in the postcode areas of 4120 and 4122 in the Hastings district. These cylinders are outside of our Rheem Warranty water chemistry terms based upon recent testing and may result in subsequent pinhole corrosion. We recommend the use of Vitreous Enamel and Stainless Steel cylinders for this area.