Designed specifically for contract interior fit out applications, Stratlock Range is the strongest mounting available from Fastmount. The SL-FA provides rapid installation of heavy panels into side-channel aluminium extrusion framework. 

• Designed for aluminium extrusion
• 18kg pull-out load with SL-M18
• 10kg pull-out load for SL-M10
• Suitable for superyacht deckhead panels
• Acoustic isolation between panel and frame
• Available in fire-rated composition — SL-FA-FR / SL-M18-FR
• Adjustability along channel for easy spacing
• Supported movement of the panel 4mm in any direction before locking into final position

Compatibility:

• Use with SL-M18 or SL-M10
• Fits into channel dimensions:
  • Mouth: 7.5mm - 8.5mm
  • Depth: minimum 7mm - 16.5mm
  • Wall thickness: 0.75mm - 1.2mm
• The distance between the panel and substrate when installed is 10.5mm at the first click, and 5mm when pressed into final position

• Specific channel types will vary throughout regions, please use dimensions to determine suitability
• See Installation Guide for full information
• Refer to Clip Layout Guide TD-15 for clip spacing recommendations
• Refer to Clip Selection Guide for suggested panel + substrate

Fastmount Panel Mounting Systems were developed for the high performance demands of the superyacht industry, and have been used in thousands of commercial and residential building projects in New Zealand and around the world since 2004.

The Stratlock Range was originally created in collaboration with Poliform Contract Italia, to help streamline contract interior fitout projects such as large hotels.

• 18kg pull-out load with SL-M18
• 10kg pull-out load with SL-M10
• Pull-out loads independently tested by SGS New Zealand
• Fastmount has a two year limited warranty on all products