You are using an outdated browser version not supported by this website.
Click here to upgrade your browser

CeminSeal Wallboard
Description

CeminSeal Wallboard is a fibre cement wet area internal lining and tile substrate product featuring CeminSeal water blocking technology.

Key Features
  • High-performing wet area internal lining and tile substrate product
  • Available in a square edge and recessed edge option
  • CeminSeal water block technology repels water and increases paint adhesion
  • Shows higher water resistance when compared to wet area plasterboard and other products
  • Smooth finish means less work for fixing and setting
  • Extremely smooth paint surface when not tiled over
Scope of Use

Suitable as a wet area internal lining and tile substrate product in kitchens, bathrooms and laundries. 

Limitations on Use
  • For internal use only
Statement of Building Code Compliance

Clause B1 Structure: Performance Clauses B1.3.1, B1.3.2, B1.3.3 (a, j), B1.3.4

Basis of Compliance: CeminSeal Wallboard complies with the requirements of AS/NZS2908.2:2002 Cellulose cement products Part 2: Flat sheets. The mechanical properties required for compliance with AS/NZS2908.2 are sufficient to meet the applied loads by inference from E2/AS1 para 9.6.3 (a) that specifies compliance with this standard for external cladding.

Related Documents:

  • SIRIM QAS International Test Report 2019CB1447 October 2019 Tests to AS/NZS2908.2:2002 Cellulose cement products Part 2: Flat sheets.
  • Acceptable Solution E2/AS1 External Moisture.

Clause B2 Durability: Performance Clauses B2.3.1 (b) when used as a tile substrate, B2.3.1 (c), B2.3.2 (a)

Basis of Compliance: CeminSeal Wallboard complies with the requirements of AS/NZS2908.2:2002 Cellulose cement products Part 2: Flat sheets. The durability tests required for compliance with AS/NZS2908.2 (frost resistance, warm water, heat rain, soak dry) provide evidence of the durability of the product in service. The product also has a significant in-service history of use.

Related Documents:

  • SIRIM QAS International Test Report 2019CB1447 October 2019 Tests to AS/NZS2908.2:2002 Cellulose cement products Part 2: Flat sheets.

Clause C3 Fire affecting areas beyond the fire source: Performance Clauses C3.4 (a)

Basis of Compliance: CeminSeal Wallboard has a Material Group number of 1-S and is suitable for use in any location, regardless of building importance level or area of use.

Related Documents:

  • Warrington Fire Test Report 45759 Issue 10.1 15 November 2019.
  • Verification Method C/CV2 Protection from fire.

Clause E3 Internal Moisture: Performance Clauses E3.3.4, E3.3.5, E3.3.6

Basis of Compliance: Internal moisture by comparison with the requirements of E3/AS1 and tests to AS/NZS2908.2:2002 Cellulose cement products Part 2: Flat sheets. Material specifications and construction details satisfy the requirements of Acceptable Solution E3/AS1 (Amendment 6) paras 3.1.2, 3.2.1, 3.3.1.

Related Documents:

  • SIRIM QAS International Test Report 2019CB1447 October 2019 Tests to AS/NZS2908.2:2002 Cellulose cement products Part 2: Flat sheets.
  •  Acceptable Solution E3/AS1.

Clause F2 Hazardous Building Materials: Performance Clauses F2.3.1

Basis of Compliance: CeminSeal Wallboard does not contain any substance that will give rise to harmful concentrations at the surface of the material where the material is exposed or in the atmosphere of any space.

Related Documents:

  • CETEC Emission Test Certificate (August 2012)
  • Cemintel Fibre Cement Safety Data Sheet

Clause G3 Food preparation and prevention of contamination: Performance Clauses G3.3.2 (a) (Contributes to)

Basis of Compliance: Acceptable Solution E3/AS1 para 3.1.2 allows (i) timber or timber-based products such as particleboard sealed with waterproof applied coatings. CeminSeal Wallboard, being a fibre cement based product sealed with a waterproof coating is at least equivalent to timber-based products with an applied waterproof coating in this environment.

Related Documents:

  • SIRIM QAS International Test Report 2019CB1447 October 2019 Tests to AS/NZS2908.2:2002
  • Cellulose cement products Part 2: Flat sheets.
  • Acceptable Solution E3/AS1 Internal Moisture. 

Technical and Installation Literature:

  • Cemintel Wet Area Systems Design and Installation Guide.
Documents
Wet Area Systems Design Guide
Product Technical Statement
Warranty
Brochure

Cemintel offers engineered cladding systems around pre-finished solutions that enhance performance and aesthetics.

Product Enquiries

News from Cemintel

Cemintel Fibre Cement Rigid Air Barrier: A Top Choice for Commercial Projects in New Zealand
Elemental Resistance For Up to Six Months
Cemintel Rigid Air Barrier Now BRANZ Appraised with Thermaflash
Get a free weekly digest of essential news

New and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.