• Timber, parquetry, cork, MDF flooring and timber
• Suitable for engineered flooring
• Suitable for areas which are subject to scuffing and high traffic use

• No sanding is required for pre-coated timber floors, preparation steps above must be followed. Please note new timber must be sanded
• All timings quoted at 25°C and 50% humidity. Cooler or humid conditions may require longer
• Do not apply this product if the temperature is below 10°C or above 35°C

Maintenance:

Cabot's Floor Clean is recommended for regular cleaning.

Once the timber floors have become excessively scratched, it's time for a re-coat with Cabot's CFP Floor Water based.