A range of floor boxes designed for use in intense conditions such as areas of vehicular traffic or heavy impact environments. These have been created with a sturdy stainless steel lid and framework and IP rated options are available for wet areas.
Stainless steel flush lid
Option for box with 14mm rebate lid with flush snorkel
Square edge finish for heavy duty options
Bevelled edge for IP Rated option
FFOB-290/10 is designed to be fitted with IP rated Industrial sockets
These Heavy Duty products are not suitable for use in wet areas, the IP rated product is suitable. These products are intended for use with fixed wiring only and must be installed according to the AS/NZS 3000 Wiring Rules.
Statement of Building Code Compliance
All PDC Floor Boxes comply with the AS/NZS 3000 Wiring Rules and AS/NZS 3112 Approval and Test Specifications – Plugs and Socket outlets providing they have been correctly installed according to the PDC installation instructions in the datasheets.
The Floor Boxes are suitable for Cat 6 Data Cables. Minimum bend radiuses can be maintained if correctly installed and the recommended Data Modules are used.
All product is quality checked during manufacture and before dispatch. In the event of a failure in use the product is backed up by the standard Vynco/PDC 12 month manufacturers warranty. Contact PDC for further warranty information.
Some replacement parts are available if required due to failures in service outside of the warranty terms and conditions.