You are using an outdated browser version not supported by this website.
Click here to upgrade your browser

Residential Series ThermalHEART Sliding Windows
For high-performance double-glazing, explore AGP’s product range available now Explore
Description

Residential Series ThermalHEART® sliding windows use the sliding door system. The sill track has a flushline appearance. Interlocker stiles are flush in the closed position. An over-light transom allows over-lights in association with sliding panels. An under-light transom allows fixed glazing below opening panels, useful if requiring large openings but protecting against falls from a height. A vertical sliding window system is not offered.

Key Features
  • Flush sill design
  • Thermal efficiency achieved through thermal breaks in aluminium profiles
  • 24mm IGU as standard but 32m IGU can be used with a wedged bead — compliance with NZBC clause H1 Energy Efficiency requires high performing Low-E double glazing
  • Door stiles and rails feature slender sightlines
  • Interlocker stiles vary in depth according to height, width and wind pressure requirements
  • Sliding windows use the sliding door system
  • Wide opening is possible in bi-parting or stacking configurations
Scope of Use
  • Suitable for broad residential use
  • Suitable for most applications where non-projecting windows are desired
  • Need to be used in defined maximum sizes according to the wind exposure
  • A good option for servery windows
  • Work well with insect screens
Limitations on Use
  • Consider the ease of reaching to the window handle if the sliding panel is placed beyond a bench
  • Some weather protection above e.g. wide eaves recommended to protect open windows
  • Compliance with Building Code H1 energy efficiency standards requires high performing Low-E double glazing
Statement of Building Code Compliance
  • Designed, tested and manufactured to meet NZS 4211: Specification for Performance of Windows, and NZS 423: Glazing in Buildings, Parts 1-4
  • Conforms to all relevant NZ Building Code clauses
In-Service History
  • Redesigned and relaunched in 2022 (previous version 2011)
  • New range rolling out nationally; previous version in use in residential projects throughout New Zealand by homeowners, builders, Group home builders and specifiers
Other Performance Attributes
  • Window and door warranty provided under normal conditions of use against failure of materials and workmanship for a period of five years
  • Surface finish is covered by a separate performance warranty dependent on the actual finish selected
  • A hardware/componentry warranty is offered against defects in manufacturing, functionality and surface finish for a period of five years, provided care and maintenance guidelines have been followed
Documents
Data Sheet: Residential Series ThermalHEART® Windows

2023

Span Tables: Residential Series ThermalHEART® Sliding Windows

2022

Altherm on Masterspec
Full Specification Guide: Residential Series ThermalHEART

2023

Specification Guide: Residential Series ThermalHEART Sliding Windows

2023

Declare Label

2022

Environmental Product Declaration (EPD) Report

2023

WGANZ Guide to E2/AS1
Altherm Care, Maintenance & Warranty Brochure (with AGP)

2020

Altherm Design Brochure

2020

AGP Cleaning & Maintenance
AGP Condensation Guide
AGP Visual Quality of Glass
Manufacturer Contact List
CAD/PDF Details
Residential Series ThermalHEART® Sliding Windows

FULL SET

PDF and ZIP (contains all DWGs)

Residential Series ThermalHEART® Sliding Windows

TRSW01-0

Residential Series ThermalHEART® Sliding Windows — Two Panel SF

TRSW02-0

Residential Series ThermalHEART® Sliding Windows — Three Panel FSF

TRSW03-0

Residential Series ThermalHEART® Sliding Windows — Four Panel FSSF

TRSW04-0

Residential Series ThermalHEART® Sliding Windows — Three Panel SSF

TRSW05-0

Installation Details
Residential Series ThermalHEART® Sliding Windows — On Board & Batten Cavity Construction

TRMWBB

Residential Series ThermalHEART® Sliding Windows — On Brick Veneer Cavity Construction

TRMWBV

Residential Series ThermalHEART® Sliding Windows — On Bevelback Weatherboard Cavity Construction

TRMWBW

Residential Series ThermalHEART® Sliding Windows — On Flat Sheet Cavity Construction

TRMWFS

Residential Series ThermalHEART® Sliding Windows — On Profile Metal Cavity Construction

TRMWPM

Residential Series ThermalHEART® Sliding Windows — On Rusticated Weatherboard Cavity Construction

TRMWRW

Residential Series ThermalHEART® Sliding Windows — On Stucco Cavity Construction

TRMWST

Residential Series ThermalHEART® Sliding Windows — On Board & Batten Cavity Construction

TRSWBB

Residential Series ThermalHEART® Sliding Windows — On Brick Veneer Cavity Construction

TRSWBV

Residential Series ThermalHEART® Sliding Windows — On Bevelback Weatherboard Cavity Construction

TRSWBW

Residential Series ThermalHEART® Sliding Windows — On Flat Sheet Cavity Construction

TRSWFS

Residential Series ThermalHEART® Sliding Windows — On Profile Metal Cavity Construction

TRSWPM

Residential Series ThermalHEART® Sliding Windows — On Rusticated Weatherboard Cavity Construction

TRSWRW

Residential Series ThermalHEART® Sliding Windows — On Stucco Cavity Construction

TRSWST

Stylish contemporary lines, effective thermal technology and unwavering attention to detail have made Altherm a favourite with architects, designers and homeowners across New Zealand.

Product Enquiries

News from ALTHERM Window Systems

An Innovative Relocation with Altherm Window Systems
Exposure vs Enclosure with Altherm Window Systems
Striking New St Kentigern Preschool Features APL Architectural Series
Get a free weekly digest of essential news

New and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.